Recent Water Damage Posts

Causes of Burst Pipes

10/18/2019 (Permalink)

Old metal pipes Pipes with corrosion can cause a big leak in your home

With all the joys of being a homeowner in Edmond, OK, there are some downsides when it comes to nature interacting with your home's hidden plumbing. If a pipe burst happens, it can be easy to become confused and frustrated with the flooding that occurs. However, there are ways to avoid this problem.

Causes of Pipe Breaks

In addition to freezing conditions, there are three other culprits that can cause a big leak:

  • Tree Roots – Trees love water, and the roots tend to find their way directly to a source. Over time, these roots can cause a weak spot to happen in the water line or loosen a connector. As the roots grow, they can eventually tighten enough to burst a pipe.
  • Corrosion – While newer homes may not face this problem, older ones typically have older systems. Technology has come a long way, which means those homes built before 1970 may not have corrosion-resistant piping.
  • Collapsed Pipe – Settling, construction and other events can impact a piping system. If there is increased weight, it could result in a collapse.

Preventive Steps

While in some cases a pipe burst may be out of your control, there are some simple things to do to prevent it from happening:

During freezing cold weather, let a faucet drip. This slight extra water flow can help reduce the chances of the line freezing.
Ensure pipes are insulated. If they are exposed, they are more likely to freeze. Additionally, even in the summer, underground pipes can get become too cold and expand, eventually bursting.
Seal any cracks or air leaks throughout your home. Keeping the cold air out of the home will help protect the plumbing inside.
Once cold weather is on its way, disconnect any outside hoses from the spigots.
Consider the air flow around your kitchen. If it seems colder under the sink, leave a cabinet door open to warm the air.
Understand where your pipes are and keep that area of the home above freezing.

If a pipe burst does happen, you don’t have to go it alone. Count on water damage restoration professionals who are Here to Help.

How To Prevent Water Damage From a Leaking Water Heater

9/11/2019 (Permalink)

If left unnoticed, a leaking water heater can flood your home in Oklahoma City, OK, and damage the surrounding areas. While an especially large leak that has damaged your walls and floors should be handled by a water damage restoration specialist, there are several steps you can take to try and stop the leaking and remove small amounts of water from your home before it becomes a much larger issue.

Common Causes of a Failed Water Heater

Depending on the source of the leak, a broken water heater may just require a quick repair or need to be replaced. If you’re not comfortable trying to repair the tank yourself, you should get the help of a professional plumber. When inspecting the water heater, you’ll find the leak may be at either the bottom or the top of the tank. Here are several common causes of a leaking water heater:

• Leaking drain valve
• Leaking pressure relief valve
• Leaking tank
• Excessive condensation
• Loose cold- and hot-water inlet and outlet connections
• Loose joint or stripped threaded nipple

Water Mitigation Procedures

If you’re sure you have a broken water heater on your hands, you will need to start by turning off the power supply, which can be powered by either electricity or gas and shutting off the water supply. You can shut off the water with either the water heater valve or your home’s main water valve. Once you get the leaking to cease, try to dry the surrounding area as best as possible and move any furniture or personal belongings from the area. If you notice excessive damage, a water damage restoration specialist will help address any damage that has occurred by using special equipment to extract water from your home and completely dry walls, floors, and furniture.

When you discover a leaking water heater, acting fast and stopping the leak will help reduce any harm to your home. Remember to seek professional help for fixing your water heater and addressing any water damage that has occurred.

3 Tips for Dealing With Water Damage

8/27/2019 (Permalink)

Provide ventilation in bathroom

Tips To Prevent Moisture Gathering In Your Home

When people imagine water damage, they tend to think of flooding after storms or damage related to putting out a house fire. However, everyday tasks can be causing damage to your home in Edmond, OK. Check out these tips for preventing too much moisture from gathering in your home to ensure your belongings are safe and dry.

1. Control the Dampness in Your House

One of the biggest causes of water damage in walls or floorboards is dampness that creates mold or mildew in these spaces. This often occurs because of too much humidity in a space, so it is important to create plenty of ventilation anywhere that could trap moisture droplets and allow them to soak into the home. Prevent leaks and provide excellent ventilation in spaces such as:

  • Crawlspaces
  • Basements
  • Attics
  • Bathrooms
  • Kitchens

2. Fix Pipes Immediately

Broken pipes can be a major cause of damage, so it is important to have a professional look at any potential leaks as soon as possible. Of course, not all leaks are immediately noticeable. For this reason, regular inspections are also important. This way, you'll find potential problems inside walls, floors, or ceilings before they become a more serious issue.

3. Clean Up the Right Way

If despite your best efforts, your home receives damage due to moisture or high water, it is important to hire a water remediation company for water cleanup right away. Professionals have the proper knowledge, tools, and experience to dry your home out thoroughly and ensure no further damage is done. Avoid doing the work on your own, as improper drying and cleaning could cause mildew or mold that further damages your home and belongings.

Water damage can have serious consequences and be extremely costly if not handles correctly and immediately. Fortunately, knowing how to handle moisture in the walls or high water, as well as when it is preferable to call a professional, helps to ensure your home stays safe, clean, and dry.

Avoid Flooding Damage While You're on Vacation

8/26/2019 (Permalink)

Water damages are the second most common claim on homeowners' insurance policies in Oklahoma City, OK, and around the country, and the number of cases is rising, according to industry experts. For many homeowners, the problems involve a broken pipe or frozen spigots during the winter. However, unsuspecting homeowners may also be hit by flooding and the need for water pipe repair while they are vacationing during warmer months.

Protect Your Home During Extended Vacations

If you're planning to leave home for more than a couple of days, take the following steps to avoid coming home to a flooded basement.

• Visually inspect pipes, the water heater and other appliances, and the external structure of your home. If there are any signs of aging or wear and tear, complete repairs or replacements before you leave.
• Inspect all hoses that attach to major appliances, such as the dishwasher. Replace any old hoses and those that show evidence of cracks and other damage.
• Add insulation to any exposed pipes if you're planning to be during cold weather. Don't turn the thermostat down too far to avoid frozen pipes and hoses.
• Check-in with your insurance agent. Some companies provide tips for keeping your home safe while you're away.
• Ask a friend or neighbor to check on your home while you're gone. Show this friend where the water main and primary shut-off valve is located so the water can be shut off if water pipe repair becomes necessary.
• If you don't have anyone to keep an eye on your home, turn all of the water off. Make sure the pipes have been drained. If you plan to be gone during cold weather, flush the toilets and leave cabinet doors open to avoid frozen water damages.

Plan Ahead To Avoid Trouble

A single broken pipe can pump several of inches of water into your home in a relatively small amount of time. When you're planning to travel away from home, these steps can help you avoid serious damages. If water pipe repair does become necessary, water damage and remediation professionals can handle some of the details until you return home.

How To Handle Commercial Water Damage

6/25/2019 (Permalink)

If your commercial property suffers of water damage, call SERVPRO of North Oklahoma City for a quick response to your emergency.

Some of the most common causes in Oklahoma City, OK, of water damage in a business are a broken pipe or a sewage drain blockage, and the results can be devastating. Fortunately, there are ways to get back to normal after a pipe burst cleanup.

The First Step in Restoring Your Business

After you have gotten the source of flooding fixed, it is time to call a restoration company to get your life back to normal. Before the professionals arrive, there are a few tips you can use to ensure a minimal amount of damage.

? Make sure to gather any loose items off wet floors and air dry in a safe, ventilated area.
? Hang any damp or wet items in an area away from the flood.
? Raise furniture off wet flooring with wood blocks or aluminum foil.
? Mop any excess or standing water on floors inside the business.
? Do not turn on any electrical appliances inside the flooded area.

Once You Have Contacted Restoration Services

Before phoning professionals, you should do a quick walk-through so you know what to report to the restoration services company. How many rooms were affected, and how extensive is the damage? With this information in hand, contact a sewer cleanup company or water damage repair services. The professionals from the company you have hired to assess your business in Oklahoma City, OK, for a pipe burst cleanup can check how much damage they can clean up and how long it will take to restore any problem areas.

After the Assessment

Restoration professionals may immediately begin the cleanup process after they have assessed your business. Powerful pumps, vacuums, and dehumidifiers can remove most of the evidence of water in your business. Wall panels and flooring may need to be replaced during this process.

Once the restoration is finished, you should be able to get back to business. You will know that you did all you could to protect your livelihood. With a few hours of quick thinking and the help of a professional restoration service, a pipe burst cleanup will be a thing of the past.

Water Heater Cleanup Tips for Homeowners

6/11/2019 (Permalink)

If your water heater is leaking, your home can quickly become flooded

A leaking water heater can cause devastating damage to homes in Edmond, OK, and many homeowners are unsure what to do when their water heater breaks. There are several useful steps homeowners can take if their water heaters fail.

Turn Off the Water Immediately

If your water heater is leaking, your home can quickly become flooded. In order to stop the flow of water into your home and decrease the likelihood of major damage, it’s often useful to turn off the main water supply to your home as quickly as possible. Knowing where your home’s shutoff valve is located before your water heater begins to leak can help you to react in a timely manner.

Shut Off Your Home’s Power

Although your first thought may not be to turn off the power in your home when you have a leaking water heater, leaving the power on with a broken water heater could be hazardous. Shutting off the power can help to minimize the risk of electrical items becoming damaged. Since wet electrical wiring can cause fires, turning off the power can also help to decrease the risk of a fire occurring in your home.

Make a Claim if Necessary and Call for Help

Depending on the amount of damage that your failed water heater has caused, you may need to make a claim to your insurance company. Once you have made a claim, it’s often also helpful to contact water damage restoration professionals. Many items in your home are susceptible to water damage, and professionals can help to mitigate the damage and can also assist in the restoration process.

Knowing how to respond to a leaking water heater can help to protect your home from major damage. Turning off the water, shutting off your home’s power and making an insurance claim and contacting professionals can make the cleanup process easier for homeowners.

The Top 3 Commercial Plumbing Problems

5/1/2019 (Permalink)

Pipes can break or leak for several reasons.

Many commercial buildings have similar plumbing problems. While dripping faucets or toilets that constantly run may only raise water bills, other issues can result in significant usage spikes or water damage. Find out more about the three most common plumbing problems and ways that building owners or managers can prevent an incident such as a clogged toilet from becoming expensive or causing extensive damage.

1. Broken or Leaky Pipes

Pipes can break or leak for several reasons. Some materials may be prone to corrode or wear out over time. Supply lines that are exposed to below-freezing temperatures can also develop frozen blockages that cause pressure to build until a pipe bursts.

2. Clogged Drains

The risk of clogs varies depending on the condition of a sewer line, the primary use of a building and the number of occupants. A sewer line that is old and penetrated by tree roots is more likely to become blocked. Restaurants where large amounts of cooking fats or grease end up in the drain are more prone to sewer backups. As the number of occupants of a building goes up, so does the likelihood that non-flushable materials will result in a clogged toilet.

3. Water Wastage

Some buildings have many bathroom facilities. This can make it harder to monitor the condition of each and every faucet and toilet. Even equipment designed to promote functionality, such as a flushometer, can end up resulting in wastage. The water wasted by dripping faucets or broken or inefficient toilets throughout a structure can add up to a significantly higher water bill.

If any of these issues are currently affecting a commercial building in Oklahoma City, OK the property owner or manager should contact a plumber. If a leak or flooding results from a broken pipe or clogged toilet, mitigation and restoration specialists can eliminate primary damage and prevent secondary damage.

What to do if you have a water loss in Oklahoma City, OK.

4/3/2019 (Permalink)

If you have a water loss in Oklahoma City, it is critical to get SERVPRO of North Oklahoma City on site immediately. Our team of qualified technicians is here to help around the clock. 

The first step on any water job is to start emergency services. This can include extracting the water from the facility. SERVPRO uses both truck mount and portable extractors to help remove all standing water. After the water is removed, SERVPRO can begin removing damaged materials and start the drying process. The second step is to begin the drying process. This can include placing air moreover and dehumidifiers throughout the property. Each day a certified technician will monitor the drying process to make sure your home or business is progressing. The last step, once the structure is dry, is to remove all of the equipment and repair any of the damaged materials. Once the property is restored, your home will be back to preloss condition. It is important to make sure any restoration company documents each step of the process, so you have accurate and update to records for your insurance company. If you have any questions, feel free to reach out to our office any time day or night.